产品介绍
英国GRIMM格林进口液化石油气泵 UK GRIMM Imported LPG pump
进口液化石油气泵.jpg
英国GRIMM格林进口液化石油气泵概述：
进口液化石油气泵,主要用于输送液化石油气、二甲醚、氯甲烷 、环氧乙烷、丙烷、丙烯、丁二烯、异丁烯、甲醇等各种性质类似的挥发性液体及石油产品，特别使用于液化石油气的装卸车，钢瓶灌装，车间供料等工作场合。该泵为容积式叶片泵，其结构先进，定子曲面由复合曲线组成，两端采用机械密封，各固定配合端面均采用“O”型密封圈，旋转运动的配合部件均采用金属相对应非金属，具有使用安全可靠、一机多用的功能。
英国GRIMM格林进口液化石油气泵工作原理：
进口液化石油气泵型式为容积式叶片泵，工作靠叶片离心滑动，流量与轴的转速有关，定子内曲面采用国内**的复合曲线制成，定子与转子、挡板、叶片组成十个密封腔体，由于定子曲面是复合曲线，当转子转动时进口腔体积逐渐增大，并形成负压产生吸力，从而将油液吸入，当转子旋转一定角度后，容积截面逐渐减小，从而将油液压出，在吸油腔与压油腔之间有一封油块把吸油腔与压油腔隔开。叶片靠离心力和两挡板结构从而与定子内曲面紧密贴合，使泵在额定状态下正常工作。
英国GRIMM格林进口液化石油气泵技术参数：
流 量：2-80m3/h
功 率：1.5-18.5kw
转 速：600r/min、780r/min
口 径：25-100mm
压 差：0.4～0.5MPa
温度范围：-40℃～40℃
工作压力：1.6Mpa
材 质：铸铁、不锈钢
英国GRIMM格林进口液化石油气泵应用领域：
主要用于输送液化石油气、二甲醚、氯甲烷 、环氧乙烷、丙烷、丙烯、丁二烯、异丁烯、甲醇等各种性质类似的挥发性液体及石油产品，特别使用于液化石油气的装卸车，钢瓶灌装，车间供料等工作场合。
UK GRIMM Imported LPG pump summary:
Imported LPG pumps are mainly used to transport volatile liquids and petroleum products such as liquefied petroleum gas, two methyl ether, chloromethane, propylene oxide, propane, propylene, butadiene, isobutene, methanol and other volatile liquids and petroleum products, especially in liquefied petroleum gas loading and unloading trucks, steel bottle filling, and workshop feeding. The pump is a volumetric vane pump, its structure is advanced, the stator surface is composed of composite curves, mechanical seals are adopted at both ends, and the "O" sealing ring is used for each fixed end face. All the rotating components are metal relative to non metal. It has the function of safe and reliable use and multi use.
UK GRIMM Imported LPG pump working principle:
The type of imported liquefied petroleum gas pump is a volume type vane pump, which depends on the centrifugal sliding of the blade. The flow is related to the rotational speed of the shaft. The inner surface of the stator is made of the original composite curve. The stator is composed of ten sealed cavities with the rotor, the baffle and the blade, because the stator surface is the complex curve, when the rotor is rotated, the inlet body is made. The product will gradually increase and form a suction pressure to produce the suction, and then the oil is sucked into. When the rotor rotates a certain angle, the volume section gradually decreases, thus the oil hydraulic out, and there is an oil block between the oil suction cavity and the pressure chamber to separate the oil suction cavity from the pressure chamber. The blade is tightly attached to the inner surface of the stator by centrifugal force and two baffle structure, so that the pump can work normally under rated condition.
UK GRIMM Imported LPG pump technical parameter:
Flow: 2-80m3/h
Power: 1.5-18.5kw
Speed: 600r/min, 780r/min
Caliber: 25-100mm
Pressure difference: 0.4 ~ 0.5MPa
Temperature range: -40 C ~ 40 C
Work pressure: 1.6Mpa
Material: cast iron and stainless steel
UK GRIMM Imported LPG pump application area:
It is mainly used to convey volatile liquids and petroleum products such as liquefied petroleum gas, two methyl ether, chloromethane, propylene oxide, propane, propylene, butadiene, isobutene, methanol and other volatile liquids and petroleum products, especially in the loading and unloading vehicles of LPG, steel bottle filling, and workshop feeding.
14979604996389173.png
进口液化石油气泵☞官网：http://www.021fmc.cn/aspcms/product/2018-5-10/1348.html
14979604996389173.png
GRIMM中国：
上海秉奇阀门有限公司为GRIMM公司在中国的总代理，是中国拥有GRIMM代理权及销售权，主要为中国地区客户提供服务与技术支持，同时，秉奇人员也积极参与总部技术培训学习，并不断掌握产品原理、实际运作、工程技术做为基石，完善对中国地区客户需求。
关于GRIMM：
英国格林（GRIMM）国际有限公司是亚太地区流体控制领域的主要生产和供应商之一，公司总部位于克莱福德，拥有一支有经验的研发队伍，实行全球统一设计，统一标准，在水泵领域内处于**地位。在许多个国家均有生产水泵基地，中国由上海秉奇阀门负责中国市场各项业务与技术支持中心，同时向中国市场销售。
英国格林（GRIMM）产品已广泛应用于市政给排水、建筑、石油、化工、液化气、食品、制药、发电、冶金、矿产、锅炉蒸汽系统、压力容器、原子能、航空、火箭等各领域，以及人们日常生活中。
英国格林（GRIMM）主要产品有：管道泵、离心泵、隔膜泵、磁力泵、真空泵、潜水泵、排污泵、计量泵、卫生级泵、罗茨风机等系列产品。
服务体系：
GRIMM品质：
GRIMM公司注重产品质量及使用寿命，全部采用先进制造技术和生产设备，并坚持不懈研发新产品，为确保不间断的全过程质量控制，在生产过程中采用(SPC)过程控制和(TQM)全面质量管理；GRIMM的严格规范实现了不让品质拖节，有效保障产品每个细节达到的性能指标。
GRIMM专业：
掌握核心的流体控制技术，提供市场**的产品、服务和解决方案，帮助用户提高效率，带来至关重要的基础设施。
GRIMM服务：
我们与用户紧密合作，支持一系列系统使用技术和文件报告，提供售前、售中、售后服务和技术支持，有了您的信任与支持，我们将更完善、更高效提供水泵流体技术方案。
GRIMM china:
Shanghai Bingqi Valve Co., Ltd. for GRIMM company general agent in China, is China with GRIMM proxy and sales rights, provide service and technical support, mainly for Chinese customers at the same time, will also actively participate in the training of technical personnel of butterfly learning headquarters, and continue to grasp the product principle, practical operation and Engineering Technology based on customer demand, improve the Chinese area.
About GRIMM:
Uk GRIMM International Co., Lid is the field of fluid control in the Asia Pacific region is one of the main production and suppliers, the company headquarters is located in Clay Forde, has an experienced R & D team, the implementation of a global unified design, unified standards, a leading position in the field of water pump. In many countries, there are production pump base, China by the Shanghai Bingqi valve, responsible for the Chinese market business and technical support center, while selling to the Chinese market.
Uk GRIMM products have been widely used in various fields for municipal drainage, construction, petroleum, chemical, gas, food, pharmaceutical, power generation, metallurgy, mining, boiler steam system, pressure vessel, atomic energy, aerospace, rockets, and people's daily life.
Uk GRIMM the main products are: pipeline pump, centrifugal pump, diaphragm pump, magnetic pump, vacuum pump, submersible pumps, sewage pumps, metering pumps, sanitary pump, blower and other products.
Service system:
GRIMM quality:
GRIMM company pays attention to product quality and service life, all adopt the advanced manufacturing technology and production equipment, and unremittingly research and development of new products, the whole process of quality control to ensure uninterrupted, used in the production process (SPC) process control (TQM) and total quality management; strictly regulate the implementation of GRIMM has not let the quality drag day, effectively guarantee the performance of each product details.
GRIMM major:
Fluid control technology master core, market leading products, services and solutions that help users improve efficiency, bring critical infrastructure.
GRIMM service:
We work closely with the user, support a series of system using technology and file reports provide pre-sale, sale, customer service and technical support services, with your trust and support, we will be more perfect and more efficient to provide technical solutions of fluid pump.
14979604996389173.png
英国格林总代理商：上海秉奇阀门有限公司，微信咨询：
Uk GRIMM total agents: Shanghai Bingqi Valve Co., Ltd., WeChat Advisory:
Welcome new and old customers call negotiate!
Contacts：Huang Tianxiang
QQ：673088832
Mobile Phone:13524269805 (微信同号）
Company Phone:021-51698378
Add:Lane 51, dragon road, Shanghai, Xuhui District
进口液化石油气泵.jpg
英国GRIMM格林进口液化石油气泵概述：
进口液化石油气泵,主要用于输送液化石油气、二甲醚、氯甲烷 、环氧乙烷、丙烷、丙烯、丁二烯、异丁烯、甲醇等各种性质类似的挥发性液体及石油产品，特别使用于液化石油气的装卸车，钢瓶灌装，车间供料等工作场合。该泵为容积式叶片泵，其结构先进，定子曲面由复合曲线组成，两端采用机械密封，各固定配合端面均采用“O”型密封圈，旋转运动的配合部件均采用金属相对应非金属，具有使用安全可靠、一机多用的功能。
英国GRIMM格林进口液化石油气泵工作原理：
进口液化石油气泵型式为容积式叶片泵，工作靠叶片离心滑动，流量与轴的转速有关，定子内曲面采用国内**的复合曲线制成，定子与转子、挡板、叶片组成十个密封腔体，由于定子曲面是复合曲线，当转子转动时进口腔体积逐渐增大，并形成负压产生吸力，从而将油液吸入，当转子旋转一定角度后，容积截面逐渐减小，从而将油液压出，在吸油腔与压油腔之间有一封油块把吸油腔与压油腔隔开。叶片靠离心力和两挡板结构从而与定子内曲面紧密贴合，使泵在额定状态下正常工作。
英国GRIMM格林进口液化石油气泵技术参数：
流 量：2-80m3/h
功 率：1.5-18.5kw
转 速：600r/min、780r/min
口 径：25-100mm
压 差：0.4～0.5MPa
温度范围：-40℃～40℃
工作压力：1.6Mpa
材 质：铸铁、不锈钢
英国GRIMM格林进口液化石油气泵应用领域：
主要用于输送液化石油气、二甲醚、氯甲烷 、环氧乙烷、丙烷、丙烯、丁二烯、异丁烯、甲醇等各种性质类似的挥发性液体及石油产品，特别使用于液化石油气的装卸车，钢瓶灌装，车间供料等工作场合。
UK GRIMM Imported LPG pump summary:
Imported LPG pumps are mainly used to transport volatile liquids and petroleum products such as liquefied petroleum gas, two methyl ether, chloromethane, propylene oxide, propane, propylene, butadiene, isobutene, methanol and other volatile liquids and petroleum products, especially in liquefied petroleum gas loading and unloading trucks, steel bottle filling, and workshop feeding. The pump is a volumetric vane pump, its structure is advanced, the stator surface is composed of composite curves, mechanical seals are adopted at both ends, and the "O" sealing ring is used for each fixed end face. All the rotating components are metal relative to non metal. It has the function of safe and reliable use and multi use.
UK GRIMM Imported LPG pump working principle:
The type of imported liquefied petroleum gas pump is a volume type vane pump, which depends on the centrifugal sliding of the blade. The flow is related to the rotational speed of the shaft. The inner surface of the stator is made of the original composite curve. The stator is composed of ten sealed cavities with the rotor, the baffle and the blade, because the stator surface is the complex curve, when the rotor is rotated, the inlet body is made. The product will gradually increase and form a suction pressure to produce the suction, and then the oil is sucked into. When the rotor rotates a certain angle, the volume section gradually decreases, thus the oil hydraulic out, and there is an oil block between the oil suction cavity and the pressure chamber to separate the oil suction cavity from the pressure chamber. The blade is tightly attached to the inner surface of the stator by centrifugal force and two baffle structure, so that the pump can work normally under rated condition.
UK GRIMM Imported LPG pump technical parameter:
Flow: 2-80m3/h
Power: 1.5-18.5kw
Speed: 600r/min, 780r/min
Caliber: 25-100mm
Pressure difference: 0.4 ~ 0.5MPa
Temperature range: -40 C ~ 40 C
Work pressure: 1.6Mpa
Material: cast iron and stainless steel
UK GRIMM Imported LPG pump application area:
It is mainly used to convey volatile liquids and petroleum products such as liquefied petroleum gas, two methyl ether, chloromethane, propylene oxide, propane, propylene, butadiene, isobutene, methanol and other volatile liquids and petroleum products, especially in the loading and unloading vehicles of LPG, steel bottle filling, and workshop feeding.
14979604996389173.png
进口液化石油气泵☞官网：http://www.021fmc.cn/aspcms/product/2018-5-10/1348.html
14979604996389173.png
GRIMM中国：
上海秉奇阀门有限公司为GRIMM公司在中国的总代理，是中国拥有GRIMM代理权及销售权，主要为中国地区客户提供服务与技术支持，同时，秉奇人员也积极参与总部技术培训学习，并不断掌握产品原理、实际运作、工程技术做为基石，完善对中国地区客户需求。
关于GRIMM：
英国格林（GRIMM）国际有限公司是亚太地区流体控制领域的主要生产和供应商之一，公司总部位于克莱福德，拥有一支有经验的研发队伍，实行全球统一设计，统一标准，在水泵领域内处于**地位。在许多个国家均有生产水泵基地，中国由上海秉奇阀门负责中国市场各项业务与技术支持中心，同时向中国市场销售。
英国格林（GRIMM）产品已广泛应用于市政给排水、建筑、石油、化工、液化气、食品、制药、发电、冶金、矿产、锅炉蒸汽系统、压力容器、原子能、航空、火箭等各领域，以及人们日常生活中。
英国格林（GRIMM）主要产品有：管道泵、离心泵、隔膜泵、磁力泵、真空泵、潜水泵、排污泵、计量泵、卫生级泵、罗茨风机等系列产品。
服务体系：
GRIMM品质：
GRIMM公司注重产品质量及使用寿命，全部采用先进制造技术和生产设备，并坚持不懈研发新产品，为确保不间断的全过程质量控制，在生产过程中采用(SPC)过程控制和(TQM)全面质量管理；GRIMM的严格规范实现了不让品质拖节，有效保障产品每个细节达到的性能指标。
GRIMM专业：
掌握核心的流体控制技术，提供市场**的产品、服务和解决方案，帮助用户提高效率，带来至关重要的基础设施。
GRIMM服务：
我们与用户紧密合作，支持一系列系统使用技术和文件报告，提供售前、售中、售后服务和技术支持，有了您的信任与支持，我们将更完善、更高效提供水泵流体技术方案。
GRIMM china:
Shanghai Bingqi Valve Co., Ltd. for GRIMM company general agent in China, is China with GRIMM proxy and sales rights, provide service and technical support, mainly for Chinese customers at the same time, will also actively participate in the training of technical personnel of butterfly learning headquarters, and continue to grasp the product principle, practical operation and Engineering Technology based on customer demand, improve the Chinese area.
About GRIMM:
Uk GRIMM International Co., Lid is the field of fluid control in the Asia Pacific region is one of the main production and suppliers, the company headquarters is located in Clay Forde, has an experienced R & D team, the implementation of a global unified design, unified standards, a leading position in the field of water pump. In many countries, there are production pump base, China by the Shanghai Bingqi valve, responsible for the Chinese market business and technical support center, while selling to the Chinese market.
Uk GRIMM products have been widely used in various fields for municipal drainage, construction, petroleum, chemical, gas, food, pharmaceutical, power generation, metallurgy, mining, boiler steam system, pressure vessel, atomic energy, aerospace, rockets, and people's daily life.
Uk GRIMM the main products are: pipeline pump, centrifugal pump, diaphragm pump, magnetic pump, vacuum pump, submersible pumps, sewage pumps, metering pumps, sanitary pump, blower and other products.
Service system:
GRIMM quality:
GRIMM company pays attention to product quality and service life, all adopt the advanced manufacturing technology and production equipment, and unremittingly research and development of new products, the whole process of quality control to ensure uninterrupted, used in the production process (SPC) process control (TQM) and total quality management; strictly regulate the implementation of GRIMM has not let the quality drag day, effectively guarantee the performance of each product details.
GRIMM major:
Fluid control technology master core, market leading products, services and solutions that help users improve efficiency, bring critical infrastructure.
GRIMM service:
We work closely with the user, support a series of system using technology and file reports provide pre-sale, sale, customer service and technical support services, with your trust and support, we will be more perfect and more efficient to provide technical solutions of fluid pump.
14979604996389173.png
英国格林总代理商：上海秉奇阀门有限公司，微信咨询：
Uk GRIMM total agents: Shanghai Bingqi Valve Co., Ltd., WeChat Advisory:
Welcome new and old customers call negotiate!
Contacts：Huang Tianxiang
QQ：673088832
Mobile Phone:13524269805 (微信同号）
Company Phone:021-51698378
Add:Lane 51, dragon road, Shanghai, Xuhui District
上一条：进口液氨泵(欧美进口品牌)
下一条：湖南哪里有脐橙营养杯苗卖
粤公网安备 44130202001157号